How To Install Rear View Camera On 2016 Jeep Wrangler Rear

Rear Seat Removal for a Jeep Wrangler

past Gregory Crews

Ablestock.com/AbleStock.com/Getty Images

The Jeep Wrangler is made for the outdoors. The interior is bones, as everything is held downwards by bolts. The dorsum seats of the Jeep are no different. Unbolt a few bolts and the seat comes right out. The seat can be removed to make actress room in the back or if you want to replace the seat. The removal will only take a few minutes.

Making Room

Ensure both of the front end seats are positioned all the way forward with the dorsum back up tilted to the dash. This will ensure that y'all will have all the room necessary for sliding out the dorsum seat. You will besides have plenty of room to loosen the bolts on the floorboard to take the seat out.

Unbolting the Dorsum Seat

Locate the four bolts that hold the seat downwardly. They will be located at all 4 corners of the demote seat. Loosen them with a socket wrench. Salvage the bolts and then you tin can use them for a new seat or install the old seat back into the jeep. In one case you have loosened the seats yous will see ii mounting brackets on both forepart bolts. Place these mounting brackets to the side with the bolts. You may need these for a later installation.

Removing the Back Seat

You can either tilt the seat over and slide it out the forepart door or try and lift information technology out the back. The easiest way is to lift the seat up slightly and, with some assistance, ease it out the passenger door. That is why yous want to brand sure the front seats are every bit far forwards every bit possible. Accept a person aid past lifting i end as you lot guide the other cease out of the passenger side. You may need to tilt the seat forward or backward to ensure it comes out of the back smoothly. Place the seat to the side and out of the way.

References

Writer Bio